home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
pr2006.zip
/
PR2006.TXT
< prev
Wrap
Text File
|
1991-02-03
|
2KB
|
40 lines
"The PRO-2006 possesses latent capability to tune the frequencies
"wired out" at the factory. To regain continuous coverage from
760 MHz through 1300 MHz, all you have to do is unplug the set from
the powerline, then:
1. Remove the plasic top cover from the radio.
2. Look behind the numeral "3" key, inside the front panel, and you
will see two diodes and blank spots for two more. Locate D-502;
the lower of the two visible diodes.
3. Snip the exposed, upper leg of D-502; push the two cut ends
slightly apart.
4. Button the case back up and be content with the continuous
frequency coverage of 25 MHx-520 MHz and 760 MHz-1300 MHz.
Next, press the STEP key three times while in any SEARCH mode,
you will see, successively on the LCD Display, the step or increment
indications of "5" kHz," "12.5 kHz" and then "50 kHz." Press the
STEP key a dozen times or a hundred, and only the above three
increments will be displayed.
Now , if you have restored the full frequecy capabilites in your
PRO-2004, 2005, or 2006, and first press the RESET key, then just
as soon as a SEARCH enters the frequency ranges of 825-845 MHz
and/or 870-890 MHz, you will see a 4th increment displayed:
"30 kHz"! It's OK! This is appropriate for the spacing in those
bands.
However, keep in mind:
1. It is illegal to listen to cellular telephone conversations.
2. Modifying your PRO-2006 will invalidate the manufacturer's
warranty.
3. If you blow up your scanner, no one will sympathize will (sic)
you.
It worked for me. Good luck, it is a nice radio.
Stephen